CONNECTION
Your BBQ is
designed to connect
directly on to a 3/8”
LH BSP camping
gas cylinder.
1. Check that the
gas valve on the
cylinder is in the
“Off” position
(turned fully
clockwise).
2. Attach the other
end of the gas
hose to the gas
cylinder valve in
an anti-clockwise
direction then
tighten using a
spanner.
3. Turn the cylinder
gas valve on in
an anti-clockwise
direction for
one full turn and
then check the
cylinder and
BBQ connection
for leaks with
soapy water, if a
leak is detected
turn the cylinder
gas valve “Off”
and retighten all
connections
then retest.
LIGHTING THE BBQ
1. Check that the gas
cylinder valve is in
the off position.
2. Using a lit long
BBQ style match
or gas lighter,
position close to
the edge of the
burner and slowly
turn the cylinder
gas control in an
anti-clockwise
direction
approximately
¼ of a turn.
3. If the burner does
not ignite turn the
cylinder gas control
in a clockwise
direction to the off
position and allow
the residual gas
to disperse before
attempting to relight
the burner.
COM1246_BBQ_manual_ED1.indd 6
14/07/10 3:46 PM