companionleisure.com.au
ASSEMBLY
1. Remove all
components from
the packaging
2. Hold the body of
the BBQ on its
side and locate
one of the three
(3) sets of leg
studs on the side
of the appliance.
Taking one of the
legs, place the
holes over the leg
studs and push in
a forward motion
to lock the leg
in place. Repeat
this step for the
remaining legs.
3. While the BBQ is
on its side connect
the hose assembly
to the threaded
section that is
exposed at the
base of the BBQ.
Take the gas hose
with the knurled nut
(includes two holes)
and tighten with
your fingers in a
clockwise direction.
4. Place the BBQ
in the upright
position and
locate the grease
collection tray.
5. Assemble the two (2)
wire handles on the
cast iron hot plate.
The hot plate has a
raised flange section
that is to assist in
locating the plate in
the correct location
on the BBQ body.
Identify the slot in
the BBQ body then
position the plate on
the BBQ.
6. Attach the wind
shield to the BBQ
plate via the two slots
located on the edge
of the plate.
COM1246_BBQ_manual_ED1.indd 5
14/07/10 3:46 PM