Compal HEL80, Руководство пользователя

Страница: 84 / 108

5 The Power System
5-3
5.1.2.2 Hibernate Mode
In Hibernate mode, power is conserved by system data being copied to the hard drive, and
your notebook is completely shut down. When Hibernate mode is exited, your notebook
will return to the same operating state it was in before entering Hibernate mode.
Hibernate mode can be enabled/disabled in the Power Options Properties window.
If enabled, your notebook will go into Hibernate mode if the battery charge level becomes
critically low.
Depending on how you set the Power Management Options on the Advanced tab in the
Power Options Properties window, use one of the following methods to enter hibernate
mode:
• When you close the lid of your notebook
• When you press the power button
• When you press the sleep hot key
•
Start
>
Turn Off Computer
>
Hibernate
(if the Hibernate option does not
show, press
Shift
, and the Standby option will switch to Hibernate).
If the Hibernate option is not available for these methods, Hibernate mode has not been
enabled. Check the
Enable hibernation
box on the Hibernate tab of the Power Options
Properties window and click
Apply
to enable Hibernation.
If your PC Cards do not operate correctly after exiting Hibernate mode, remove
and reinsert the card or restart your notebook.
To exit Hibernate mode, press the power button. You cannot exit Hibernate mode by
pressing a key or touching the Touch Pad. For more information on Hibernate mode, see
2.1
Turning Your Notebook On and Off
.
.