background image

      ORIGINAL INSTRUCTIONS | Ref. quality process  002/03 | v 01/09/2022 | K08021H09

4

1.

 SAFETY

READ THE SAFETY AND USE 

INSTRUCTIONS CAREFULLY 

BEFORE FIRST USING         

THE APPLIANCE

This device should 

only be used for the 

function for which 

it was designed: 

tamping 

ground coffee

.

Do not use the 

device to press any 

other types of food 

such as nuts or granulated 

foods such as sugar and 

others.

This device 

may be 

used by children 

aged 8 years and 

over, by people with 

reduced physical, sensory 

or mental capacities and 

by people without prior 

experience/knowledge,

 

provided they have received 

supervision or instructions 

on the safe use of the 

device and understand the 

associated risks.

     

Children should not 

play with the device.

Cleaning and 

maintenance of the 

device should not be 

carried out by children without 

supervision.

Do not allowing 

liquids to come 

into contact with 

internal or external 

surfaces 

while the appliance is on or 

off, except for those parts 

expressly mentioned in the 

“CLEANING” section.

If, for any reason, this happens, 

disconnect the power supply 

immediately and dry all 

surfaces carefully.

Содержание CUBE TAMP





















Отзывы: