manualshive.com logo in svg

compa 300 JE, Руководство оператора

Поделиться
Скачать
compa 300 JE Скачать руководство пользователя страница 34

COMPA TECH S.r.l.

Web: www.compasaw.com - E-mail: [email protected]

Tel. (+39) 059 527887 - Fax (+39) 059527889

- 34 -

ENGLISH

Operator’s handbook

9. TROUBLESHOOTING

Each machine is assembled and scrupulously tested 

in our plant before being shipped, it is very unlikely 

that it will be subject to faults or breakage.

However we have prepared a list below summarising 

the main causes of faults which may occur and the 

measures you need to take to resolve them.

9.1 

The blade does not cut completely

If the blade does not cut the piece completely, adjust 

the lowering of the saw-motor arm using regulator P 

(fi g. 36) on the upper right part of the support.

However, be careful that the blade does not touch 

the rotating table.

9.2 

Incorrect cutting table angle

If the cutting angle is incorrect, adjust the rotating 

table as follows:

 

Adjust eccentric bush R (fi g. 37) after having 

loosened the screws which lock it. Then rotate it 

in one direction or the other until obtaining the 

correct position.

9.3 

Incorrect maximum table rotation

If the rotating table stops its rotation at more or less 

45°, adjust regulator S (fi g. 38) located on the right 

and left rear part of the support arm.

9.4 

Incorrect arm inclination

If the saw-motor arm inclination angle in position 0° 

o 45° is not exact, adjust regulator T (fi g. 39) located 

on the left and right side of the support.

10. DISPOSAL

If the machine is to be scrapped, its parts must be 

disposed of separately.

Look after the environment! 

Contact a specialised centre for the collec-

tion of metals.

The structure of the cutting-

off machines and the blade 

are made of steel, while some 

parts such as the handle, the 

casings of the electric motor 

etc. are made of polymeric 

material.

In this regard, divide the 

materials according to their 

type, entrusting specialised 

and authorised companies for 

their disposal, in compliance 

with the law.

In compliance with Directive 2002/96/EC, it is for-

bidden to dispose of the machine with the normal 

household waste.

Contact the dealer for disposal.

Look after the environment! 

Dispose of cuttings (chips, shavings, etc.) 

in compliance with the regulations in force.

Содержание 300 JE





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды