INS_FVT110/BO_REV–
2/15/12
PAGE 1
INSTALLATION AND OPERATION MANUAL
FVT110(M,S)1/BO
IN-DOME 10-BIT DIGITAl VIDEO TRANSMITTER wITh
BOSCh BIPhASE AND BIlINX CAMERA CONTROl
The FVT110/BO is a video transmitter and data transceiver that supports the
simultaneous transmission of short haul quality 10-bit EIA RS250C digital video and
Bosch Biphase and Bilinx camera control signals over one single mode or multimode
optical fiber.
The FVT110/BO in-dome module supports Bosch Bilinx up-the-coax camera control
over its entire specified fiber distance. The series features a unique time-base
correction algorithm that removes the usual distance limitations associated with
up-the-coax control.
Bi-color (Red/Green) lED indicators are provided for rapidly ascertaining equipment
operating status.
Figure 2
on
Page 3
describes the lED indicators for each light on the
receiver unit.
The FVT110/BO is intended for mounting within the Bosch dome. See
Page 2
for
mounting instructions.
