Comnet CWGE9MS, Инструкция по установке и эксплуатации

Страница: 23 / 118

22
5.3 CLI Management
The system supports two types of console management – CLI command. After you login
to the system, you will see a command prompt. To enter CLI management interface,
enter “ enable ” command. The following table lists the CLI commands and description.
Commands Level
Modes Access Method Prompt Exit Method About This Mode1
User EXEC Begin a session
with your
switch.
switch> Enter logout
or quit.
The user commands
available at the user level
are a subset of those
available at the privileged
level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command while
in user EXEC
mode.
switch# Enter
disable to
exit.
The privileged command is
advance mode
Privileged this mode to
• Display advance function
status
• Save configures
Global
Configuration
Enter the
configure
command while
in privileged
EXEC mode.
switch
(config)#
To exit to
privileged
EXEC
mode, enter
exit or end
Use this mode to configure
parameters that apply to
your switch as a whole.