17
[NOTE]
When the X-Ring function is enabled, the user must disable the RSTP. The X-Ring
function and RSTP function cannot operate simultaneously.
With X-Ring topology, every switch enables the X-Ring function and assigns two
member ports in the ring. Only one switch in the X-Ring group would be the backup switch
with one of the two member ports’ being a backup port then switches are called working
switches’ working ports. When the network connection fails, the backup port will
automatically become a working port to the failure. In the X-Ring group, switches are
setting in “slave mode” by default, but one must be the “master mode”. If there are 2 or
more switches in the master mode, then software will automatically select the switch with
lowest MAC address number as the ring master. The ringmaster has the rights to
negotiate and command to other switches in the X-Ring group.
If a link fails the ringmaster is alerted and invokes its secondary port to rebuild the
Содержание CWGE9MS
