INS_CWGE2SC(M,S)2_REV- 06/22/12 PAGE 3
TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL
CWGE2SC(M,S)2
FIGURE 4 – INDICATING LEDS
FIGURE 5 – DIP SWITCH POSITIONS
LED
Status
Meaning
Power
On
Power is on
Link/ACT (FP)
On
Fiber link port is connceted
Flashing
Packets sending/receiving
Link/ACT (TP)
On
TX port is connected
Flashing
Packets sending/receiving on TX port
FDX/COL
On
TX port full duplex mode active
Off
TX port half duplex mode active
FX or SD
On
Fiber signal is detected
1000M
On
TX in 1000 Mbps speed
Off
TX in 100 Mbps speed
Function
DIP Switch Position
1
2
3
4
Link Fault Pass-through function. DIP Switches 1 and 4 must be set
to opposite positions (default is 1 ON/4 OFF)
OFF/
ON
ON/
OFF
Pass-through Mode / Enable Jumbo Frame
ON
ON
Enable Store and Forward Mode (default)
OFF
OFF
Modified Cut-through mode
ON
OFF
