Comnet CWGE24MODMS, Инструкция по установке и эксплуатации

Страница: 83 / 106

77
jumbo [size] Interface
configuration
mode
Set jumbo frame size.
Use the no form of this
command to default value.
[Jumbo size must be even and
between 1522~10240]
1522 switch(config)# interface
gigaethernet 1
switch(config-if)# jumbo 1524
or
switch(config-if)# jumbo 10240
rate-limit
input-mode
{bc|mc|unkuc|kno
wnuc}
or
no rate-limit
input-mode
{bc|mc|unkuc|kno
wnuc}
Interface
configuration
mode
Set
rate-limit input
mode.
You can enable rate-limit for
specific packets such as
broadcast, multicast, unknown
unicast and known unicast.
Use the no form of this
command to disable for that
packets
Disable
switch(config)#
interface
gigaethernet 1
switch(config-if)#
rate-limit input-mode bc
or
switch(config-if)#
no rate-limit input-mode bc
or
switch(config-if)#
rate-limit input-mode mc
or
switch(config-if)#
no rate-limit input-mode mc
rate-limit
input-rate
[value]
Interface
configuration
mode
Set rate-limit input rate value.
Input rate limit must be
between 1~1526
Disable switch(config)# interface
gigaethernet 1
switch(config-if)#
rate-limit input-rate 1000
rate-limit
output-mode
or
no rate-limit
output-mode
Interface
configuration
mode
Set rate-limit output mode.
You can enable output
rate-limit.
Use the no form of this
command to disable output
rate limit.
Disable switch(config)#
interface
gigaethernet 1
switch (config-if)#
rate-limit output-mode
switch (config-if)#
no rate-limit output-mode