46
5.14 RSTP Configuration
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol
and provides for faster spanning tree convergence after a topology change. The system
also supports STP and the system will auto-detect the connected device that is running
STP or RSTP protocol.
5.14.1 System Configuration
1. The Root Bridge information of Spanning Tree is for viewing.
2. Modify RSTP state. After modifying, select
RSTP mode:
enables RSTP function before configuring the related parameters
Priority (0-61440):
a value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root. If the values
change, user has to reboot the switch. The value must be a multiple of 4096
according to the protocol standard rule.
Max Age (6-40):
the number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting a
reconfiguration. Enter a value between 6 through 40.
Hello Time (1-10):
the time that controls the switch and sends out the BPDU
packet to check RSTP current status. Enter a value between 1 through 10.
Forward Delay Time (4-30):
the number of seconds that a port waits before
changing from its Rapid Spanning-Tree Protocol learning and listening states to
the forwarding state. Enter a value between 4 through 30.
Содержание CWFE8MS/DIN
Страница 29: ...23 Login Screen...
Страница 42: ...36 802 1q VLAN Add interface 6 Select Next and then the page will display as shown below...
Страница 59: ...53 QoS configuration Interface...
Страница 71: ...65 Event Configuration interface...
