Comnet CNGE2FE8MSPOE, Инструкция по установке и эксплуатации

Страница: 39 / 162

32
5.4 CLI Management
The system supports the console management—CLI command. After you log in on to the
system, you will see a command prompt. To enter CLI management interface, type in
“ enable ” command.
CLI command interface
The following table lists the CLI commands and description.
5.5 Commands Level
Modes
Access
Method
Prompt
Exit
Method
About This Mode1
User EXEC
Begin a
session with
your switch.
switch>
Enter
logout or
quit .
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command
while in User
switch#
Enter
disable to
exit.
The privileged
command is the
advanced mode.
Use this mode to