Comnet CNGE20FX4TX16MS, Инструкция по установке и эксплуатации

Страница: 46 / 155

INS_CNGE20FX4TX16MS
04/30/18 PAGE 46
INSTALLATION AND OPERATION MANUAL CNGE20FX4TX16MS
TECH SUPPORT: 1.888.678.9427
Table 4-14. L2 Switching > Port Mirror
Item Description
Session ID Click the drop-down menu to select a port mirroring session from the list. The
number of sessions allowed is platform specific.
Monitor session state Click the drop-down menu to enable or disable the session mode for a selected
session ID.
Destination Port Click the drop-down menu to select the destination port and receive all the traffic
from configured mirrored port(s).
Allow-ingress Click the drop-down menu to enable or disable the Allow-ingress function.
Sniffer RX Ports Enter the variable to define the RX port.
Sniffer TX Ports Enter the variable to define the TX port.
Apply Click Apply to save the values and update the screen.
The ensuing table for Mirror Status settings are informational only: Session ID, Destination Port,
Ingress State, Source TX Port and Source RX Port.
4.5.3 Link Aggregation
Link Aggregation is a method for combining multiple network connections in parallel in order to
increase throughput beyond the capability of a single connection, and to provide redundancy in
case one of the links should fail.
Load Balance
The Load Balancing page allows you to select between a MAC Address or IP/MAC Address
algorithm for the even distribution of IP traffic across two or more links.
To access this page, click L2 Switching > Link Aggregation > Load Balance.
Figure 4-17. L2 Switching > Link Aggregation > Load Balance
Table 4-15. L2 Switching > Link Aggregation > Load Balance
Item Description
Load Balance
Algorithm Select the radio button to select the Load Balance Setting: MAC Address or IP/MAC
Address.
Apply Click Apply to save the values and update the screen.
The ensuing table for Load Balance Information settings are informational only: Load Balance