Comnet CNGE20FX4TX16MS, Инструкция по установке и эксплуатации

Страница: 32 / 155

INS_CNGE20FX4TX16MS
04/30/18 PAGE 32
INSTALLATION AND OPERATION MANUAL CNGE20FX4TX16MS
TECH SUPPORT: 1.888.678.9427
4.3.2 Logging Message
The Logging Message Filter page allows you to enable the display of logging message filter. To
access this page, click Monitoring > Logging Message.
Figure 4-4. Monitoring > Logging Message
Table 4-2. Monitoring > Logging Message
Item Description
Target Click the drop-down menu to select a target to store the log messages.
Buffered: Store log messages in RAM. All log messages are cleared after system reboot.
File: Store log messages in a file.
Severity The setting allows you to designate a severity level for the Logging Message Filter function.
Click the drop-down menu to select the severity level target setting.
The level options are:
emerg: Indicates system is unusable. It is the highest level of severity.
alert: Indicates action must be taken immediately.
crit: Indicates critical conditions.
error: Indicates error conditions.
warning: Indicates warning conditions.
notice: Indicates normal but significant conditions.
info: Indicates informational messages.
debug: Indicates debug-level messages.
Category Click the drop-down menu to select the category level target setting.
View Click View to display all Logging Information and Logging Message information.
Refresh Click Refresh to update the screen.
Clear
buffered
messages
Click Clear buffered messages to clear the logging buffer history list.
The ensuing table for Logging Information table settings are informational only: Target, Severity
and Category.
The ensuing table for Logging Message table settings are informational only: No., Time Stamp,
Category, Severity and Message.