INS_CNFE3DOE2/M
10/11/11 PAGE 43
INSTALLATION AND OPERATION MANUAL
CNFE3DOE2/M
TECH SUPPORT: 1.888.678.9427
Factory Defaults
There are two methods to set the terminal server back to factory defaults.
»
Select “Reset to Factory Defaults” on the Network page.
»
Press the reset button on the device.
Factory defaults are
»
IP address 192.168.10.1/24
»
No gateway
»
D1 TCP port is configured for listening on port 23
»
D2 TCP port is configured for listening on port 24
»
D1 serial port is configured as a Debug console port 115200 baud 8 bit/no parity/1 stop
»
D2 serial port is configured for RS-232 115200 baud 8 bit/no parity/1 stop
Figure 46 Terminal Server Factory Defaults Page Factory Defaults
