M300 Pro GNSS Receiver User Guide
10
⑧Power button
Turn on or off the receiver
Receiver is turned on automatically when connecting with the power charger.
Without the power supply, press the power button to turn on the receiver
with screen display
【
M300 pro System Init…
】
.
To turn off the receiver, please hold power button down for 3 seconds, the
display shows
【
Power Off?
】
, press
Enter
button to select Yes, press
Esc
button
to select No.
⑨Cancel button
Cancel the modification setting.
3.2.2 Status screens
To review and change the receiver’s settings, press direction button to display status
screens. There are 13 status screens showing the following information:
Home screen: the number of satellites, the battery level and internal storage.
In power-saving mode, the display screen will go dark If non-operation for a
short time. Press any button to reactivate the screen.
Latitude and longitude
PDOP, and height values
Receiver serial number
Receiver version
Expired date
Configurable items
Receiver local IP address
Receiver default gateway
Current subnet mask
Auto IP
HTTP, FTP port
Storage setting and format SD
Default and reset settings
To change the above settings, using left and right buttons to move the cursor, up and
down buttons to change the setting.
