Distributed Design Series™
DA6 SPECIFICATIONS
Community Professional Loudspeakers
333 East Fi h Street
Chester, PA 19013-4511 USA
TEL: 1-(610) 876-3400 FAX: 1-(610) 874-0190
www.communitypro.com
© 2012 All Rights Reserved
13SEPT2012
Loudspeaker Type:
6.5-inch, two-way, full-range, coaxial, surface mount loudspeaker,
8 ohm or 70V/100V operation
Frequency Range
(Half-Space):
80 Hz to 20 kHz (-3 dB)
65 Hz to 22 kHz (-10 dB)
Nominal -6dB Beamwidth:
115° conical (1 kHz to 6 kHz)
Crossover Frequency:
1.2 kHz
Sensitivity (1w/1m):
93 dB (125 Hz to 12.5 kHz) half space
91 dB (250 Hz to 4 kHz) half space
Nominal Impedance:
8 ohms
Power Capacity:
RMS 100W (28.3V)
Program 250W (44.7V)
Peak 400W (56.6V)
Max SPL (1m Free Space):
113 dB (119 dB Peak) 8 ohm tap
Autoformer Taps--70V:
100V:
60W, 30W, 15W, 7.5W and low impedance
60W, 30W, 15W and low impedance
Enclosure Type:
High-Strength, Impact-Resistant, Injection-Molded ABS Plastic (Paintable)
Environmental:
IP55 (per IEC529), designed to Mil Spec 810 Standards
Colors:
White or Black (Paintable)
Mounting System:
Included flush-mount wall bracket
(fits 1 or 2-gang electrical box - not included)
Dimensions—Height:
Width:
Depth:
11.2 inches (284.2 mm)
15.3 inches (388.7 mm)
8.3 inches (211.5 mm)
Loudspeaker Weight:
11.9 lbs (5.4 kg)
Shipping Weight:
17.7 lbs (8.0 kg)
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
