Community Compact 600 Скачать руководство пользователя страница 2

 Page 2                

 

                                        Quick Start Guide 

I SERIES IP800/IP600, IS800/IS600

IMPORTANT SAFETY INSTRUCTIONS 

Always follow these basic safety precautions when using or installing I SERIES loudspeakers and 
accessories:

•  Read these instructions prior to assembly.
•  Keep these instructions for reference.
•  Heed all warnings.
•  Follow all instructions, particularly those pertaining to rigging, mounting, hanging and electrical 

connections.

•  Do not use this apparatus near water.
•  Clean only with dry cloth.
•  Do not block any ventilation openings. Install in accordance with the manufacturer’s instruction.
•  Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat.

•  Only use attachments and accessories that are specified and approved by the manufacturer. 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 
damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The terms CAUTION,  WARNING, and DANGER may be used in this manual to alert the reader to 
important safety considerations. If you have any questions or do not understand the meaning of 
these terms, do not proceed with installation. Contact your local dealer, distributor, or call Community 
directly for assistance. These terms are defined as:

CAUTION:

 describes an operating condition or user action that may expose the equipment 

or user to potential damage or danger. 

WARNING:

 describes an operating condition or user action that will likely cause damage 

to the equipment or injury to the user or to others in the vicinity. 

DANGER:

 describes an operating condition or user action that will immediately damage 

the equipment and/or be extremely dangerous or life threatening to the user or to others 
in the vicinity.

These installation instructions are for use by qualified personnel only. To reduce the risk of fire or 
electric shock do not perform any servicing other than that contained in the operating instructions 
unless you are qualified to do so.

RIGGING AND ELECTRICAL SAFETY 

IMPORTANT: 

The loudspeakers described in this manual are designed and intended to be 

mounted to differing building surfaces using a variety of rigging hardware, means and 
methods. Installation of loudspeakers should only be performed by trained and qualified 
personnel. All electrical connections must conform to applicable city, county, state, and 
national (NEC) electrical codes.

DANGER: 

All rigging fittings must be fully tightened and secured. Any missing fasteners  or 

parts will compromise the structural integrity of the enclosure and constitute a safety 
hazard. Do not suspend this loudspeaker unless all fasteners are securely in place!

.

DANGER:

 It is possible to experience severe electrical shock from a power amplifier. 

Always make sure that all power amplifiers are in the “OFF” position and unplugged from 
an AC Mains supply before performing electrical work.

IMPORTANT: 

Re

fer to the sections on installation and connections later in this manual for 

additional information on rigging and electrical safety.

IMPORTANT: 

The flat-head hex-drive rigging screws that come installed in each enclosure 

must either be replaced with rigging brackets and threaded fasteners, or they must be 
kept in place to seal the enclosure from air leaks. If the rigging fittings do not remain 
sealed, air leaks will occur in the enclosure that will compromise the low-frequency 
performance with distortion, reduced output, and premature driver failure.

CAUTION: 

Installation of 

I SERIES loudspeakers should 

only be performed by trained 

and qualified personnel. It is strongly 

recommended that a licensed and 

certified professional structural 

engineer approve the mounting. 

Severe injury and/or loss of life may 

occur if  this product is improperly 

installed.

UNPACKING / INSPECTION 

Community 

I SERIES 

loudspeakers are engineered 

and manufactured to be rugged and they are 
carefully packed in sturdy cartons. However, it 
is recommended to thoroughly inspect each unit 
after it has been removed from the packaging, as 
damage could occur during shipping.
Please note that once the shipment has left 
your dealer or the Community factory, the 
responsibility for damage is always borne by 
the freight company. If damage has occurred 
during shipping, you must file a claim directly 
with the freight company. It’s very important to 
contact the freight company as soon as possible 
after receiving your shipment, as most freight 
companies have a short time limit within which 
they will investigate claims. Make sure to save 
the carton and the packing material, as most 
claims will be denied if these materials are not 
retained. Your Community dealer and the factory 
will try to help in any way they can, but it is the 
responsibility of the party receiving the shipment 
to file the damage claim.
It is always a good idea to retain the carton and 
packing materials, if possible, in the event that 
the unit may need to be returned to your dealer 
or distributor for repair in the future. 

IN THE CARTON

Each shipping carton contains the following:

•  Loudspeaker (fully assembled)
•  Rubber feet and attachment screws 

(subwoofers only)

•  Information packet

DANGER: 

I SERIES rigging fittings are 

rated at a Working Load Limit (WLL) of 
225 lbs (102.1 kg) with a 10:1 safety 

margin. No single rigging fitting should ever be 
subjected to a load that is greater than this 
stated limit. Failure to heed this warning could 
result in injury or death! 

Содержание Compact 600

















Отзывы: