background image

I SERIES IP800/IP600, IS800/IS600                               Quick Start Guide 

 

                     

                             Page 15 

CUSTOMER SUPPORT 

FOR MORE INFORMATION AND APPLICATION ASSISTANCE

For more information on installing and operating your I SERIES loudspeaker, 
please refer to Community’s website at www.communitypro.com. 
For application support, service or warranty information, refer to Community’s 
website or contact Community at 610-876-3400 or toll-free (within the US and 
Canada) at 800-523-4934. 

Note: 

Every effort has been made to insure that the information contained in this manual was complete and 

accurate at the time of printing. However, due to ongoing technical advances, changes or modifications may have 

occurred that are not covered in this manual. The latest version is available at communitypro.com.

WARRANTY INFORMATION 

TRANSFERABLE WARRANTY “(LIMITED)” VALID IN THE USA ONLY

The I SERIES loudspeakers are designed and backed by Community Professional 
Loudspeakers. For complete warranty information within the USA please refer 
to www.communitypro.com/warranty. Please call 610-876-3400 or visit the 
website to locate your nearest Authorized Field Service Station. For Factory 
Service call 610-876-3400. You must obtain a Return Authorization (R/A) number 
prior to the return of your product for factory service. 

WARRANTY INFORMATION AND SERVICE 

FOR COUNTRIES OUTSIDE THE USA

To obtain specific warranty information and available service locations for 
countries other than the United States of America, contact the authorized 
Community Distributor for your specific country or region.

SHIPPING DAMAGE / CLAIMS

If the product is damaged during transit you must file a damage claim directly 
with the freight company. It’s very important to contact the freight company as 
soon as possible after receiving your shipment, as most freight companies have 
a short time limit within which they will investigate claims. Be sure to save the 
carton and packing materials, as damage claims can be denied if these materials 
are not retained.  If evidence of physical damage exists upon arrival, be cautious 
before signing the delivery acceptance receipt. Often, the fine print will waive 
your right to file a claim for damage or loss after you sign it. Make sure that 
the number of cartons shown on the freight documents have actually been 
delivered.

Содержание Compact 600

















Отзывы: