product
Guide
User and
Maintenance
Information
(cont’d)
© 2010 Community Products LLC
QG69 DC 6656 Revision D
Customer serviCe:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone (800) 777-4244
Fax (800) 336-5948
(845) 572-3468
www.CommunityPlaythings.com
Maintenance
Periodically inspect for cracks, breaks, and loose or
missing parts. Remove products from service when
any condition develops that might make operation
unsafe.
Cleaning
Clean the Craft Units with mild detergent and water.
Too much water will harm the finish on the wood.
Baskets are machine washable.
Construction
The wooden components are manufactured from
solid maple and maple plywood and are protected
with a durable clear finish. Baskets and totes are
made of polypropylene.
Packaging Recycling
All our packaging is recyclable in two simple
categories:
Please help us preserve the earth for the children and
recycle at an appropriate facility.
User modifications
We are not responsible for modifications made by
customers to our products in the field without our
supervision, testing, or evaluation.
Ordering parts
To order replacement parts, contact Customer
Service with a description of the part(s) needed
and the ID Code from the product.
Use only replacement parts supplied by
Community Playthings.
CAUTION
c
Only rearrange items when Craft Counter Top
is empty. Use hand holds provided. Do not re-
arrange units with children nearby.
c
Lift with 2 people.
c
Do not attach Craft Counter Tops to 40” high
Roomscapes furniture.
c
Only attach Craft Counter Tops to Roomscapes
furniture that is the same length.
c
Craft Counter Tops are not intended to be used
on a table.
Connection to Roomscapes items
Craft Shelves can be connected to Roomscapes
posts, panels, and furniture. The posts attach to the
plastic couplings that are on the sides of the units.
For more information on Roomscapes connecting
system, see the Roomscapes Product Guide F601
supplied by Community Playthings with every Room-
scapes order.
Mobility
It is important to understand how to operate the
mobility feature, which can be easily engaged, and
disengaged using the following procedure:
1. With one person at each end of the unit, tip
slightly forward or back, allowing the toe trim
to pivot.
2. One person keeps the item tipped, while the
other rotates the toe trim to the desired position
by pulling or pushing on one of the hand holds at
each end of the toe trim. (Figure C)
3. Tip the unit slightly to the other side and repeat
the procedure with the other toe trim.
CAUTION
c
Never change the position of the toe trim with
less than two people.
c
Always use the hand holds provided at each end
of the toe trim. (Figure C)
c
After disengaging the wheels, give item a small
sideways push to settle the wheels into place.
You will notice the item sitting down securely on
its glides.
c
Never adjust mobility with children nearby.
Figure C
Packaging Materials
Recycling Category
Cardboard boxes and
pads, newsprint
corrugated cardboard
Plastic wrap, sheet
foam, foam pads
Plastic #4 LDPE
