1
MAX
¼
in
CR2032
CLICK
1
5
9
2
6
10
3
7
11
4
8
3 - REPLACING THE BATTERY
IMPORTANT:
Always open and close the case using the following instructions
to avoid damaging the casing.
2 - TRANSMITTER TEST
Press any button on the front of the transmitter and verify that the LED light illuminates. The LED light
flashes when the battery is low. When replacing the battery, ensure the battery polarity is correct as
shown in Figure 7.
To memorize the transmitter to the receiver, please check the instructions on the receiver. The PLAY is
compatible with 390 MHz frequency compatible receivers.
