Page 24 of 28
© 2019 CommScope, Inc. All Rights Reserved
15.5.
Position the dome over the organizer.
15.6.
Close the latches.
15.7.
Before engaging the seal mechanism, make sure
the flange hits the bottom surface.
15.
Close and seal enclosure
15.1.
Make sure the seal segments are properly installed
in all the 6 seal slots.
15.2.
Put the fiber dressing tool and the wedge into its
place at the top of the backside of the organizer.
15.3.
Slide the base over the organizer and put it in its
correct position over the gel seals.
15.4.
Lock the base by pushing the yellow bracket
downwards into the slots.
