860543388
Instruction Sheet
www.commscope.com
Page 10 of 19
2. Place the
iPatch
upgrade kit on the front of the tray, being careful to pull the ribbon cable through opening
in the center of tray at the same time. Do not allow cable to be kinked or damaged. Cable will be pulled
to back of shelf when connecting to backplane kit.
Note:
Ensure that the ribbon cable is still firmly connected to the back of the
iPatch
upgrade kit. If the
connector does need re-inserting, orient it so the red dot is facing the top edge of the kit for correct
alignment with the connection on the back of the kit.
3. Once the
iPatch
upgrade kit is seated over the MPO distribution panel, push on center and both release
latches at sides of the kit to engage the latches and secure kit.
4. Repeat for all modular pair trays.
5. Follow items 5 through 11 of the HD sliding modular cassette below.
HD 1U/2U/4U Sliding Modular Cassette Shelf
1. Slide modular pair tray forward for access. Trays slide to the front of the shelf separately until reaching
stops that prevent them from sliding out.
2. Place the
iPatch
upgrade kit on the front of the tray, being careful to pull the ribbon cable through opening
in the center of tray at the same time. Do not allow cable to be kinked or damaged. Cable will be pulled
to back of shelf when connecting to backplane kit.
Note:
Ensure that the ribbon cable is still firmly connected to the back of the
iPatch
upgrade kit. If the
connector does need re-inserting, orient it so the red dot is facing the top edge of the kit for correct
alignment with the connection on the back of the kit.
3. Once the
iPatch
upgrade kit is seated over the MPO distribution panel, push on center and both release
latches at sides of the kit to engage the latches and secure kit.
4. Repeat for all modular pair trays.
5. Insert the panel bus jumper 5-pin connector into the shelf through opening in back of side wall, to be
connected to backplane kit as shown in Detail
A.
iPatch
upgrade kit
Ribbon cable
Distribution panel
(2 places)
Shelf is not shown for clarity
Release latch
Modular pair tray
Ribbon cable
860543388-009
