CommScope PFU-P-C-O-060-02, Руководство по оборудованию

Страница: 28 / 38

Two Port PoE Extender Hardware Manual
24 This product is copyright © 2017 CommScope, LLC. All Rights Reserved.
Connecting the fiber
1.
Insert the SFPs in place.
2.
Remove the sheath from the fibers, Allowing 14cm of sheath from the initial cable split, as
in Figure 3.1. Place the strippers at the desired strip location, close the wire strippers fully
once, then open. Now, by hand you may pull the center element jacket off, revealing the
aramid and optical fibers.
3.
Remove excess aramid as desired for termination.This allows the sheath to rest on the
beginning of the splice tray.
4.
The fibers should wrap around the splice tray twice.
5.
The splice to the fiber connectors should sit in the splice island in the tray as below.
Note: Insert the bottom SFP in place first. This SFP is inserted upside down. The SFPs should only
be inserted or removed with the power off.