CommScope OMX 600 Splice Bay, Руководство пользователя

Страница: 42 / 50

ADCP-93-090 • Rev C • March 2021
Page 36
© 2021, CommScope, Inc.
7. Locate 192-fiber or 288-fiber IFC cables and Blocking Kit within OMX Cabinet. as
follows:
a. Place 192-fiber or 288-fiber cables inside OMX Splice Cabinet into either the outer
right or left area of the cable management channels as shown in Figure 33 on Page 33
and Figure 34 on Page 33 .
b. Mark the cable to identify the blocking kit location as well as the front of the cable for
positioning of the Blocking Kit as shown in Figure 37
8. Complete the IFC routing per Figure 38 ,
Figure 37. 192-Fiber IFC Blocking Kit Position
Note: The final positioning of the IFC fiber Blocking Kit within the outer portions of the
cable management channel of the OMX Splice Cabinet is important. The Blocking Kit
will be positioned to allow room for additional cables and blocking kits in the two outer
cable management channels of the OMX Splice Cabinet. Make sure that the bottom of the
IFC blocking kits are 7-inches above the first splice tray location. If this dimension is any
closer, there is a risk of the oval tubing kinking and needs to be avoided.