CommScope OmniReach FTTX, Инструкция

Страница: 6 / 13

ADCP-96-806 • Issue 4 • July 2016
Page 6
© 2016
CommScope
. All Rights Reserved.
Figure 3. Typical Grounding Wire Installation
4 CABLE INSTALLATION
Four cable entry ports are provided in the splicing compartment section of the 48-port IFDT.
Figure 4 shows the location of the entry ports and cable tie plates. Cables may enter the cabinet
from any of the four openings.
Figure 4. Cable Entry Ports
S CREW
S TAR
WA S HER
S TAR
WA S HER
CU S TOMER PROVIDED
COMPRE SS ION LUG
NUT
NUT
#6 COPPER
WIRE
GROUNDING S TUD
IN S TALLATION
COMPRE SS ION
LUG
IN S TALLATION
THREADED
IN S ERT
GROUNDING S TUD
IN S TALLATION
GROUNDING S TUD WITH
GROUNDING LUG IN S TALLATION
GROUNDING S TUD WITH
COMPRE SS ION LUG IN S TALLATION
S CREW
S TAR
WA S HER
NUT
THREADED
IN S ERT
24762-A
S TAR WA S HER
NUT
#6 COPPER
WIRE
GROUNDING
LUG
IN S TALLATION
GROUNDING
LUG
TIGHTEN NUT S AND
S CREW TO 40 INCH-LB S
(4.5 Nm) OF TORQUE
TIGHTEN NUT S AND
S CREW TO 40 INCH-LB S
(4.5 Nm) OF TORQUE
BOTTOM CABLE
ENTRY PORT S
TOP CABLE
ENTRY PORT S
CABLE TIE
PLATE S
CABLE TIE
PLATE S
24763-A