7.2
Adapter components
The dust cap threads into the adapter housing. An O-ring on the dust cap provides a tight seal when the dust cap is in
place.
7.3
Connecting the Full Size connector
7.3.1
Remove dust cap
1 Use a 216B key tool to unscrew the dust cap from the HT optical port.
Note:
The 216B key tool is not included.
2 Unscrew the dust cap from the cable connector.
3 Pull the dust cap off.
Note:
Field person
n
el must take care when proceeding to remove dust caps on the full size connector and
adapter,
to prevent contaminant particles entering to the adapters or connector end-face.
page 7 / 15
© 2022 CommScope, Inc. All Rights Reserved
