9.3.3
Secure dust caps
1 Thread the drop cable dust cap into the adapter dust cap.
2 Tighten both dust caps until finger tight.
3 This ensures that both dust caps will stay clean when not in use.
9.4
Disconnecting the Prodigy connector
1 Unscrew the drop cable dust cap from the adapter dust cap.
2 Pull the locking ring down to "unlock" the connector.
3 Grasp the connector and pull it out with a "45-degree twist to unlock" out of the adapter.
4 Thread the adapter dust cap into the optical port until finger tight.
5 Thread the drop cable connector into the drop cable dust cap until finger tight.
9.5
Prodigy connector cleaning
The connectors and adapters are cleaned at the factory, however inadvertent contact and/or dust can still occur during
transport, storage and installation. CommScope recommends all connector interfaces be cleaned prior to every mating.
To clean the connector interface, follow the procedure as described in the installation instruction “cleaning hardened
connectors”. To clean the connector interface, follow the procedure as described in the installation instruction “cleaning
hardened connectors”.
page 13 / 15
© 2022 CommScope, Inc. All Rights Reserved
