CommScope LSX, Руководство пользователя

Страница: 4 / 30

ADCP-93-095 • Rev B • April 2018
Page 4
© 2018, CommScope, Inc.
The LSX panel is shipped with pre-terminated, factory-installed ribbon or stranded pigtails. The
panel is available in five chassis heights with different numbers of termination positions, as
follows: 1.75-inch high with 12 or 24 termination positions; 3.5-inch high with 48 termination
positions; 7-inch high with 72 or 96 positions; 9-inch high with 144 positions; and 11-inch high
with 288 positions (documented in a separate manual). Figure 2 shows the main external
features of the 7-inch high panel. The 1.75-inch, 3.5-inch, and 9-inch high panels have
analogous features.
Figure 2. Main External Features of 7-Inch High LSX Termination/Splice Panel (Front View)
The features shown are as follows (see Figure 2 ):
• LGX-Compatible Chassis— is of solid metal construction and painted white. Nine 7-inch
chassis or seven 9-inch chassis may be installed on an LGX frame.
• Bulkhead— holds the pass-through adapters that provide the physical interface between
the connector ends of internal pigtails and patch cords installed on the bulkhead.
• Adapter Pack— 6-, 8-, 12- or 24-pack depending on model; mounts in the bulkhead
providing one column of adapters/connectors for terminating patch cords. Connector types
available include singlemode USC, ASC, and UFC, and multimode SC.
• Patch Cord Guides— provide cable management in routing patch cords.
• Removable Front Cover— provides unimpeded access for installation of patch cords.
• Patch Cord Designation Card— is used to record patch cord usage.
• Removable Radius Limiter— provides bend radius protection for the fibers.
17523-A
CONNECTOR
PACK
BULKHEAD
LGX
COMPATIBLE
CHASSIS
PATCH CORD
GUIDE
REMOVABLE
FRONT COVER
PATCH CORD
DESIGNATION
CARD
MOUNTING
BRACKET
SPLICE AREA
ACCESS DOOR
REMOVABLE
RADIUS
LIMITERS