
ADCP-92-098 • Rev C • May 2018
Page 4
© 2018
CommScope
. All Rights Reserved.
Typically, these panels ship empty (without adapter packs, MPO cassettes, splice trays, or
pigtails), but they may also be ordered with any of these components already installed.The panel
accommodates adapter packs and MPO cassettes.
The panel may be ordered loaded with adapter packs only, or loaded with both adapter packs
and pre-terminated, factory-installed cable. While not recommended, field-installed connectors
can be accommodated.
The panel may be used in either single mode or multimode applications, and with either
stranded or ribbon cable. Cables can be either Intrafacility Fiber (IFC) or Outside Plant (OSP).
Figure 2
s
hows a 2U panel.
Figure 2. FPX 2U Panel with Termination Only (Rear View)
Caution:
Adapter packs and MPO cassettes should not be both used in the same panel.
INDIVIDUAL
SUBUNIT
PROTECTIVE
TUBES
CABLE
BREAKOUT
FANOUT
CHIPS
CABLE
CLAMP
24620-A