10
7 Closing the closure
6.2
Grounding
6.2.1 Secure the grounding wire with the eyelet to the grounding bolt.
6.2.2 Connect the outer grounding wire onto the outer grounding
feed through of the closure.
7.1
Insert the plugs between the outer strain relief in the unused
cable ports.
7.2
Write down the installation date on the re-entry label in the
cover of the closure.
7.3
Close the cover by closing the latches starting with the middle
latch of the closure.
7.4
Rotate the knob 2-3 times clockwise without pushing on it.
Position the two marking holes of the knob and the closure cover in line
before pushing the locking knob down.
7.5 Push the knob down and turn the knob clockwise until the locking
lip is behind the stop.
6.1.4 Installation of the cables: see section 4 “Cable installation”.
