© 2018, CommScope, Inc. All Rights Reserved.
TC-96248-IP Rev C December 2018
Customer Interface Connections from MPO patch cord
to LC patch cord are as indicated below.
26809-A
7
6
When cabling the other (right) side of the
panel, route cables and patch cords in the
opposite direction, toward the right side.
(Left and right side routing should be mirror
images of one another.)
Continue to the right, connecting
MPO-LC sections
while routing the MPO
cable and LC patch cords to the left
as shown. Route the cables and patch cords
up or down the rack to the cable runway.
Beginning at the MPO-LC section 1
on the left side, connect the
first MPO patch cord
then connect the related LC
patch cords
per the picture above.
NOTE:
Order the cables neatly using velcro straps;
cut to length needed.
TECHNICAL ASSISTANCE AND PRODUCT INFORMATION
http://www.commscope.com/SupportCenter
PRODUCT PATENTS
http://www.cs-pat.com
NOTE:
When connecting lower row connectors,
remove thumb screws on cable management
bar to allow bar to move and provide better
access to lower row. Use caution not to
stress cables attached to cable bar.
9
MPO
FIBER 11
MPO
FIBER 1
MPO
FIBER 4
MPO
FIBER 12
MPO
FIBER 3
MPO
FIBER 2
MPO
FIBER 9
MPO
FIBER 10
B A
B A
A B
A B
NOTE:
Since the bottom duplex adapters/connectors
are upside down, they are reversed (”AB”
instead of “BA,” as shown in detail above).
8
VELCRO
STRAP
