CommScope FACT NG4 Скачать руководство пользователя страница 2

Страница: 2 / 11

Page 2 of 11

Product image

Note: FACT chassis with LC-Adapters shown as example.

Kit content

•  FACT element NG4
•  Brackets
•  Color coding labels
•  Transparent pockets with labels

Mounting FACT chassis in rack

5.1.

Mounting FACT chassis

5.1.1.

Prepare the rack with the brackets on the position

where you want to install the FACT chassis (by sliding them

in ).

5.1.2.

Take the FACT chassis with both hands and align

with the brackets on both sides.

5.1.3.

Slide the FACT chassis into the fingers until you

hear a “clicking noise”.

5.2.

Dismounting FACT chassis

5.2.1.

Open upper drawer (releasable).

Note: empty drawer is shown. This one is marked at the front

(blue marking at the bend control).

5.2.2.

Pull the blue puller locks (make sure both sides

-left & right- are in the unlocked position).

Содержание FACT NG4












Результаты поиска

Содержание FACT NG4

Отзывы:

Похожие инструкции для FACT NG4

Бренды по названию

Популярные бренды

CommScope FACT NG4, Руководство по установке

Результаты поиска

Содержание FACT NG4

Отзывы:

Похожие инструкции для FACT NG4

Бренды по названию

Популярные бренды