1 General
Customer Wall Outlet 2 Fiber for max. 2 bend reduced fibers, 2
SC-adapters or 1 LC-Duplex adapter.
The box is designed for indoor applications for a maximum of 2 fibers.
The maximum fiber length is 1.2 m before and 1.2 m after the splice.
Up to 2 SC- or 1 LC-Duplex-Adapter can be inserted. The box is wall
mountable or can be mounted onto a wall box with a mounting hole
distance of 60 mm.
The box provides cable entrances (Ø 3 - 7 mm) on the left hand, top,
bottom and back side of the box. The box can also be loaded with
max. 2 pre-assembled cables (drop cable) Ø 3 mm from the bottom or
back side. A hinged splice cassette inside, can support max. 2 crimp
splices, 2 heat shrinkable splices. The box can be protected with a
screw or wire seal.
COWO
I N S T A L L A T I O N I N S T R U C T I O N
Customer Wall Outlet
2 Kit content
3 Handling of the box
• 2 X Screw ISO 7049 ST3,5x30-C-H-A2
• 2 x Wall Plug D5-25
• 1x Installation Instruction
• 1x Screw M5 (for securing the box)
3.1
To open the cover press the engagement hook in the middle
of the bottom side of the base (as shown) and pull the cover upwards.
A screw driver can be used to assist in opening the cover. At about
120° the cover will lock in place. It is possible to remove the cover
completely , by pushing, if needed. To close the cover, push the cover
down until in the hook is engaged.
3.2
To open the cassette press the engagement hook in the
middle of the bottom side of the base (as shown) and pull the cassette
upwards. At about 105° the cassette will lock in place. To close the
cassette, push the cassette down until it snaps in.
TC-1203-IP
Rev A, Apr 2017
www.commscope.com
