CommScope ADCP-90-326, Руководство пользователя

Страница: 13 / 26

ADCP-90-326 • Rev B • November 2020
Page 13
© 2020, CommScope Inc.
6.3 Termination Only FMT Configuration
Cables routed into the FMT for termination only will typically be pre-terminated individual
cables of 2 mm or 3 mm diameter. Refer to the following instructions.
6.3.1 24-Position Termination Only Tray, Universal Entry
Route and install the cables as shown in Figure 9 . Place kurly locks at locations indicated.
Figure 9. Cable Routing for 24-Position Termination Only Tray, Universal Entry
20 3 40-A
1
FROM BOTH S IDE S ROUTE THE FIR S T 10 FIBER S DIRECTLY INTO THE
BACK 10 ADAPTER S .
2
FROM BOTH S IDE S ROUTE THE NEXT 12 FIBER S AROUND THE EDGE
PROTECTOR S (2 FIBER S PER EDGE PROTECTOR) AND INTO THE NEXT
12 ADAPTER S .
3 FROM BOTH S IDE S ROUTE THE LA S T 2 FIBER S AROUND THE FRONT EDGE
PROTECTOR S (2 FIBER S PER EDGE PROTECTOR) AND INTO THE FRONT
2 ADAPTER S .
ROUTE FIBER S ALONG THE
S OLID ARROW ON INDICATED
PATH, THEN FOLLOW THE
APPROPRIATE DOTTED LINE.
1
1
2 2
2 2
2 2
3 3
KURLY
LOCK
KURLY
LOCK