3X 120.0°
228.60
(Continued from page 1)
CommScope
Bulletin 628043 • Revision A • March 2015 Page 2 of 4
3X-V65A-3XR Antenna
Figure 3. Mounting and Cable Routing Holes on Base.
(continued on page 3)
to securely anchor the antenna.
prior to installing the antenna.
be marked and made ready in the mounting surface
alignment. It is recommended that the mounting holes
2. Refer to Figures 3, 4 and 5 for mounting and boresite
desired performance.
antenna must be considered prior to mounting to ensure
indicator (featured in Figure 5). The direction of each
The boresite of each antenna is shown by the boresite
3. Using customer supplied hardware, mount the base plate
of the antenna to the mounting surface. Tighten hardware
Viewed From Bottom Side Of Antenna
BASE PLATE
8 mm THICK
Recommended hardware is M16 or 5/8"
3X 40.20
75.00
3X 106.07
3X R76.20
6X R23.21
283.50
3X 17.5
Mounting Holes
Equi-Spaced in 3 Positions on 228.6 mm PCD