ADCP-90-459 • Issue 2 • June 2016
Page 11
© 2016
CommScope
. All Rights Reserved.
3
UNPACKING THE PRODUCT
Unpack and inspect the 2RU FMT as follows:
1. Inspect the exterior of the shipping container for evidence of rough handling that may have
damaged the contents of the container.
2. Unpack the 2RU FMT and check for possible damage.
3. If damage is detected or if parts are missing, file a claim with the commercial carrier and
then notify ADC Customer Service. Save damaged carton for inspection by the carrier.
4. For repair, replacement, and warranty information, refer to
Section 8
on the last page of
this manual.
5. Save the shipping container for use if equipment requires shipment at a future date.
Table 1. 2RU FMT Specifications
ITEM
DESCRIPTION
Dimensions (H
W
D)
See
Figure 8
. Shipping dimensions 8 x 15.5 x 24 in. (20.3 x 39.4 x 61 cm)
Weight
Approx. 10 lbs. (4.54 Kg) Shipping weight approx. 11 lbs. (5 Kg)
72-POSITION TERMINATION (UNIVERSAL OR LEFT ENTRY)
Capacity
One tray holds up to 12 adapter 6-packs, providing a capacity of 72 front
terminations and 72 rear terminations per tray.
Connector Types
A variety of connector types are available. Refer to the product catalog for a
current listing.
72-POSITION MICRO-VAM
Capacity
With single circuit micro-VAMs: 12 inputs, 24 outputs
With dual circuit micro-VAMs: 24 inputs, 48 outputs
Connectors
A variety of connector types are available. Refer to the product catalog for a
current listing.
Split Ratio
Split ratios ranging from 98:2 to 50:50 are available. Refer to the product
catalog for a current listing.
48-POSITION TERMINATION/SPLICE
Capacity
48 splices; 48 terminations.
Connectors
Same as above.
Splice tray capacity
Four tray capacity each with two splice chips providing a total of 12 splices.
BULKHEAD STORAGE See
Figure 23 on page 26
.
Capacity
150 1.6mm patch cords.
115 1.7mm patch cords.
85 2.0mm patch cords.
50 3.0mm patch cords.
Storage per patch cord
2 meters (6.56 feet).
