Commercial Electric MB-54634, Инструкция по использованию и уходу

Страница: 5 / 12

Installing the wall mount (concrete/brick wall)
masonry blocks
masonry block.
2
Use the wall mount (A) as a template to mark the installation holes. Use a level to ensure the wall mount
(A) is level.
AA
BB
CC
Use a
1
/
4
in. (6 mm) masonry drill bit to slowly drill 2.4 in. (60 mm) pilot holes. Then use a
3
/
8
in. (10 mm)
masonry drill bit to expand pilot holes.
Insert anchors (AA) into the holes. Ensure the anchors are completely flush to the concrete surface
even if covered by a layer of joint compound or other material.
Attach the wall mount (A) to the wall using the lag bolts (CC) and lag bolt washers (BB) as shown.
Installation (continued)