6
Installation (continued)
2A
Installing the wall/eave
mounting base plate
(Fig. 1)
FF
A
A
C
C
(Fig. 2)
(Fig. 3)
EE
DD
(OPTIONAL)
Wall/Eave Mounting Base Plate Set Up On
Standard junction boxes
NOTE:
The fixture comes with the knuckle stem and the
wall/eave mounting base plate (C) is in the box.
□
Place the sealing gasket (FF) on the knuckle
stem and thread wires through the hole of
the wall/eave mounting base plate (C), being
careful not to pinch the wires. (Fig. 1)
□
Place the fixture head (A) in the required
orientation with the plate. Place the lock
washer (EE) on the knuckle threaded stem and
tighten the butterfly nut (DD). (Fig. 2)
IMPORTANT:
It is important to adjust the desired left to
right orientation of the fixture head (A) with the wall/eave
mounting base plate (C) at this step. (Fig. 3)
2B
Installing with the swivel
knuckle mount
Landscape post
Domed junction box
cover plate
B
B
FF
FOR MOUNTING TO DOMED JUNCTION BOX
COVER PLATE (SOLD SEPARATELY) OR
LANDSCAPE POST (SOLD SEPARATELY)
Ground and Wall/Eave Mounting
NOTE:
The fixture comes with the 1/2 in. threaded NPS
swivel knuckle mount (B) and is compatible with standard
domed junction box cover plates with a center hole or
landscape posts.
□
Place the sealing gasket (FF) on the knuckle
mount stem (B).
□
Thread wires through the hole in the domed
junction box cover plate or landscape post.
□
Screw the threaded knuckle mount (B) into the
center hole of the domed plate or landscape
post and, if the hole is not threaded, use the
lock washer (EE) and butterfly nut (DD) to
tighten the fixture into place.
□
Use the allen key (CC) to loosen the bolt in
the center of the knuckle mount stem (B) and
select the desired angle. Tighten the bolt to
secure into place.
