5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
LAMP CONTROLS
INSTALLED AT 9.5 FT AFF
INSTALLED AT 16 FT AFF
Motion Detection Range
0
1
2
3
4
5
1.75
43.6˚
81.4˚
0
1
2
3
1.75
67.3˚
90˚
1. One side of the lamp has a 3-function rocker switch that controls the lamps
power and the motion functionality.
MOTION ON: Activates motion sensor to turn light on and off
based on sensing movement
1. The other side of the lamp has 3 adjustable settings that are used to customize the lamp functions.
LUX: Adjusts motion sensors operation based on the amount of ambient light present where fixture is
installed. Preset to operate whether room has sunlight or no sunlight exposure. Turn dial to the
right with a Philips head screw driver to decrease the sensitivity to motion
if significant sunlight is present in room fixture is located and preference
is for fixture not to be triggered by motion.
NOTICE: Fixture should be hung
from ceiling so fixture is at a
maximum height of 16’ for the
motion sensor to operate properly
SENS: Controls the sensitivity to the size of the object in motion. The factory
preset is set at maximum sensitivity. Turn the dial to the right with a
Philips head screw driver to decrease the sensitivity to small objects in motion
that may cause false triggering of the sensor.
POWER OFF: Turns off fixture.
MOTION OFF: Deactivates the motion sensor and turns light on.
Fixture remains on in manual mode.
TIME: Controls the time in minutes the light remains on when triggered by motion. The factory preset
is set at a maximum time of 9 minutes. Turn the dial to the right with a Philips head screw driver to
decrease the time the light remains on (1 min. minimum). The time resets each time after motion is sensed.
1 MIN
9 MIN