4
Installation Options
FLUSHMOUNT INSTALLATION
J-HOOK, CHAIN AND S-HOOK INSTALLATION
Complete this procedure to install the fixture using the hanging cables (BB).
You will also need J-hooks (not included).
45 in
1. Attach two J-hooks (not included) to the ceiling. Ensure that
they are spaced 45 in. apart (see Pic. 3).
2. Install the hanging chain to the ceiling J-hooks.
4. Zip tie cord to hanging chain (see Pic. 3c).
5. Plug the power cord into an outlet.
1. Install two screws (AA) on the mounting surface and ensure they are spaced 44.28 in. apart.
Gap (D) should be larger than .138”.
Recommended screw dimensions: Head: 6.9~8.7mm, Screw: 4.0~4.2mm.
Complete this procedure to install the fixture with J-hooks, chains
(not included) and S-hooks (not included).
Screw
J-HOOK AND HANGING CABLE INSTALLATION
44.28
Screw
1. Attach two J-hooks (not included) to the ceiling. Ensure they are spaced 45 in. apart (see Pic.1).
2. Insert the hook ends of the cable (BB) into the key hole slots at the ends of the fixture.
(see Pic. 2a - 2d).
3. Hang the cables (BB) on the ceiling J-hooks.
4. Zip tie cord to hanging cable (see Pic. 2e).
5. Plug the power cord into an outlet.
D=.138-.158”
45”
3. Use 1/2 in. - 1 in. S-hooks (not included)
and hook one end of the S-hooks into the key
holes on the fixture and the other end to the
end of the hanging chain (see Pic. 3a - 3b)
Pic. 1
Pic. 2a
Pic. 2b
Pic. 2c
Pic. 2d
Pic. 2e
Pic. 3c
Pic. 3
Pic. 3b
Pic. 3a
