Installation Guide
Low Voltage Recessed Cable Plate w/ Duplex Receptacle
Item # 641134
Model #5310-WH
□
□
4
5
After using the included template to cut out the hole for the
install, pull electrical building wire through one of the four
knockouts in the electrical work box.
PULL ELECTRICAL BUILDING WIRE
WIRE THE RECEPTACLE
Wire the receptacle by connecting the White wire to the silver
screw, the Black wire to the brass screw, and the Green ground
wire to the green grounding screw. Then place the receptacle into
the electrical work box.
B
□
6
SECURE ELECTRICAL WORK BOX
Secure the electrical work box onto the back of the cable
plate using a Phillips head screwdriver.
□
7
PLACING THE PLATE
Swing the plate into the wall opening (receptacle first) and
tighten down the screws until the plate fastens tightly against
the wall.
Installation
3026001
