CommBox Interactive Pulse, Руководство пользователя, Страница: 12 / 24

12
+61 2 9975 6001
13
FF FD 22 FF FC 22
FF FD 1F FF FC 1F
FF FB 05 FF FE 05
FF FD 21 FF FC 21
FF FB 01 FF FE 01
FF FD 06 FF FC 06
FF FD 00 FF FC 00
FF FB 00 FF FE 00
FF FD 25 FF FC 25
3.1.3 Authentication (Optional)
If authentication details have been setup, the following request/response sequence will
occur. If no authentication details are configured, this step is skipped.
Authentication will be setup in the system menu in the screen, but is blank by default. The
double quotes in the table should be omitted. They are there to show any white space
required.
Request from Screen Respond With
"login: " <username>\r
"Password:" <password>\r
<username> and <password> are substituted with the username and password.
3.1.4 Welcome (Required)
Once the session is ready, and any authentication is successful, a welcome message is sent
by the screen to inform the client that it can start sending commands.
The welcome message is: Welcome to the CommBox Control Protocol\r
5.2 Audio and Video Equipment
1) Use HDMI cable to connect audio and video equipment to HDMI output.
2) After cable connection, plug in the power cord, and switch the power on.
3) Press the key to turn the product on.
4) Press the Input key to switch to HDMI port.
5.3 Audio and Video Equipment
1) Use HDMI cable to connect audio and video equipment to HDMI input.
2) After cable connection, plug in the power cord, and switch the power on
3) Press the key to turn the product on.
5.4 AV IN
1) Use AV audio and video cables to connect audio and video equipment to
AV output (yellow for video, red for right audio channel, and white for left
audio channel).
2) After cable connection, plug in the power cord, and switch the power on.
3) Press the key to turn the product on.
4) Press the Input key to switch to AV port.