CommBox Interactive Classic 4K, Руководство пользователя

Страница: 9 / 22

+61 2 9975 6001
9
1.
2.
3.
1.
2.
2 Setup
2.1 Remote Control Setup
2.1.1 Inserting batteries into the remote
Press the tab on the battery case and open it
Insert the battery (1.5V AAA) into the battery case
Replace the battery case and push it down until clack sounds
If anything obstructs the front of the IR receiver the remote may not work
When loading the battery, check if the polarity of the batteries is correct
If you are not using the remote for long time, remove the batteries to prevent
damage caused by leaking battery fluid
Don't expose the battery to direct sunlight or excessive heat such as a fire
2.2 Touchscreen Setup
2.2.1 Turning on the power
Connect the power cable of the product into outlet with AC 100-240V 50 / 60Hz
Turn on the main AC power switch
If the power indicator is green, the screen will turn on automatically
If the power light is red and not green, press the power button on the remote or on the
bottom right hand side of the touchscreen to turn on the power
2.2.2 Changing language of the menu
The menu's language is set to English as the default
Users can select alternative languages if required
To change the menu language,
Press the Menu button to open the menu. Select Setup from the main menu
Select Language of the Setup menu