Commax JNS-PSM, Руководство пользователя

Страница: 7 / 22

4
5.4 Presence switch
5.4.1 For emergency case, the nurse put the presence switch to inform the location with
corridor lamp function and notifying to be reply for the master station’s call.
5.4.2 If the presence switch is on, the corridor lamp will be on display the master station.
5.4.3 To cancel the presence switch, put the presence switch it again.
5.5 Emergency switch (For toilet use)
5.5.1 For emergency case, push the switch to announce the emergency.
5.5.2 If that case, the corridor Lamp is on, display the master station with red lamp.
5.5.3 To cancel the emergency switch, put the emergency switch it again.
5.6 Emergency shower switch (For shower room use)
5.6.1 For emergency case, push the switch to announce the emergency.
5.6.2 If that case, the corridor lamp is on, Display the master station with red lamp.
5.6.3 To cancel the emergency switch, Put the emergency switch it again.
5.7 Staff Call Function
5.7.1 In emergency, nurse in a patient room can announce the emergency to nurse station
through the call button in sub station.
5.7.2 If the presence switch is on, white corridor lamp will be automatically lighted and red
corridor lamp will blink.
5.73 To cancel the presence switch press the off switch.
5.7.4 The conversation can be available when the master station receive the call, it will be a
presence position.
5.8 Emergency Switch (Corridor Toilet)
5.8.1 For emergency case, push the switch to announce the emergency, it can be
connected 16ea with the master station.
5.8.2 If that case, the corridor Lamp will be lighted, display the master station with red lamp.
5.8.3 It will be alarmed directly from the master station, red LED in corridor toilet will blink.
5.8.4 To cancel the emergency switch, Put the emergency switch it again
6. How to set up the characterized Number
The system is a data communication system though the Microprocessor, it should
be set up the characterized number to be functioned.
6.1. Interphone.
- The DIP switch in CDS-90AN PCB shall be set up by binary numbers.
(It can be set up from No. 10 to No. 99) – Refer to the related drawing no. 9-4
www.safemag.ru
www.safemag.ru