When ADMIN is registered,
1.
Press * button
2.
Press 1234, and *Button (Access to the system menu)
3.
Select “USER” and press * button
4.
Select “ENROLL” and press * button
5.
Input password(USER ID) and set up to the privilege; User or Admin (After User
ID, press and set the privilege using the and button )
6.
Register fingerprints and/or card
When ADMIN is not registered,
1.
Press * button
2.
Input Admin ID and Press # button
3.
Verify Fingerprint or Card of the above Admin ID (Access to the system menu)
4.
Select “ENROLL” and press * button
5.
Input password(USER ID) and set up to the privilege; User or Admin (After User
ID, press and set the privilege using the and button )
6.
Register fingerprints and/or card
7.
(*Default admin ID is 1234. Once the new admin is registered, 1234 will no longer
work. In case of the absence of the admin, getting at least more than two admin
staff charged is recommended)
7. Sensor:
Shows T65 connected with sliding door and relevant controls; door contact,
door sensor, exit button, infrared sensor.
8. Relay
: Shows physical access controls of T65 by connecting many devices which
detect certain situation through the sensors explained in the above. Electric strike or
alarm devices to be operated with T65 using the connection of part ①.
Cable-Connection
Register