Commax HX-800E, Инструкция по эксплуатации, Страница: 29 / 95

29
NAME (protocol type)
SPEED (19200, 14400, 9600, 4800, 2400)
ID (0-63)
2-4-3. Motion Zone Setup
Select MOTION ZONE using the control button (
◀ ▲ ▶ ▼
) and select either PARTIAL ZONE or FULL
ZONE using the control button (
◀ ▲ ▶ ▼
). And press the SEL button.
If FULL ZONE is selected, the motion setting screen is not displayed. Only set the level of sensitivity for
MOTION SENSITIVITY.
FULL ZONE : The motion sensor is active on the whole screen.
PARTIAL ZONE : The motion sensor is active in the set detection frame.
Select the sensor detection position using the control button (
◀ ▲ ▶ ▼
) and press the SEL button.
Then the color of the position which is selected will be changed. Press ESC button to return to the DEVICE
setup menu.
Figure 2.4.3. Motion Zone selection screen