Commax DRC-701LC/RF1 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 56

Commax DRC-701LC/RF1 Скачать руководство пользователя страница 38

37

①

Press Program Button "P".

②

Press Management password.

③

Press Call Button "E".

④

Press "15" (number fifteen).

⑤

Press Call Button "E".

⑥

From a household unit, call security. The factory default household unit number appears
on the OLED display of the lobby phone. Please Press the actual unit number.

⑦

Enter the actual unit number and press Call Button "E".

⑧

Enter "0"(0 is Master lobby phone number. If multiple lobby phones are installed, please

enter the corresponding lobby phone number) and press Call Button "E".

⑨

On the OLED display, the unit number input mode appears.

⑩

By repeating 6, 7, 8, 9 procedures, other unit numbers can be registered.

⑪

As unit number registration is done press Cancel Button "X" to exit.

<References>

Master-videophone's "Multi Sub Number" is number 0 (zero).
Sub-videophone's "Multi Sub Number" is given between 1 and 9.
Up to 10 videophones can be installed in a single household unit and
the "Multi Sub Numbers" shall not be overlapped.

"Multi Sub Numbers" for sub-videophones shall be registered in
numerical order.

At least one Master-videophone with "Multi Sub Number 0" must be
installed and if only one videophone is installed, it is considered as

Master-videophone (set as Multi Sub Number 0).

In case that ADT-481 is installed, it does not register as Master unit.
If sub-videophone is 485 system, its Master-videophone's Multi Sub
Number is 1 (one) and those of sub-videophones are between 2 and

9.

«
...
36
37
38
39
40
...
»

Содержание DRC-701LC/RF1

























































Отзывы:

Нет отзывов