Commax CIP-700M, Руководство пользователя

Страница: 22 / 33

16
* As a common wiring type product, damage may result if the installed Household
videophone unit is removed and installed at a different location.
* Please turn the unit ON.
* When damage or malfunction of the unit has been detected, please contact the
Customer Service Center right away.
* An appropriate circuit breaker must be installed in the building's interior wiring.
* Do not place vase, water bottles, and etc on top of the unit.
* Please ensure that electrical power has been completed blocked from the unit when
installing or repairing the unit.
22. Instruction for use
▶
When more than one videophone is connected to the system and one of those
videophones are in use, the call cannot be made by another videophone within that
system.
▶
Also, incoming pages while a call is being made are only heard through the
videophone in which that call is being held from.
▶
When an emergency situation occurs, emergency alarm will be sounded by all
installed videophones, and the Cancel/Reset feature can only be performed through
videophones supporting that feature.
▶
This videophone is able to call the guard, wireless phone(ext. 5) and Master
phone(ext. 1) but in other places (common entrance, other households, local loop
and so on), only receiving is available.(Master interlocking function)
Monitor
T4 X 18
Wall bracket
Mounting Screw
M3 X 8
Monitor
Fixing Screw
Connector
(7P X 1EA)
Adapter
(DC 14V)
Bracket for wall mount Manual
23. Contents
POWER CORD
16
21
Turn off Away mode
1) On the Scene screen, press the Away setting button.
2) If password input screen is displayed, enter password and press 'OK' button.
3) When password is matched, Away mode is canceled.
6.3. Security mode
Security mode on/off
Security setting status display
Ȅ
G
This function is implemented when a security sensor is installed in a household.
Ȅ
G
Sensor usage setting can be set in [Setting> commax connection> Sensor use selection].
Security mode setting
1) Check the security sensor to set by pressing the 'Security Zone (
¤
)' button.
2) Press the 'Apply (
£
)' button to activate the security sensor in the designated zone.
[Security Setting Screen]
Ȅ
The number of images in the security setting sensor is displayed by the number of sensors set.
Turn off security mode
1) Press the 'Security' button.
2) When the password input screen is displayed, enter the password and press 'OK'.
3) If the password matches, the security mode is canceled.
6.4. Scenario Control
1) Click the scene you want to execute from the list.
2) The set device is controlled collectively.
¤ £