25
1) Wallpad type setting
- You can set wallpad using Maset or Slave
- If wallpad sets Slave, input IP of Master wallpad and select Slave number (501 ~ 510)
※
If
you
are
a
member
of
COMMAX,
you
need
to
initialize
the
member
information before setting it as Slave.
※
After
the
setting
of
the
month
pad
type
is
completed,
it
is
automatically
rebooted.
Note) a. When operating master and slave in the cab, make sure all the IP of the
wall pad is set to fixed IP
(When set to DHCP, synchronization between master and slave may not be
possible.)
B. When the slave malfunctions or power is off, communication delay between
master and slave occurs and all devices may slow down There is.
C. If the IP address of the slave is changed, be sure to reboot the master wall
pad to synchronize the master / slave.
D.
If
changing
the
slave
wall
pad
to
Master,
be
sure
to
reboot
the
existing
Master Wall Pad to synchronize Master / Slave It will be canceled.
2) You can change the password for disarming emergency and Away mode.
